Full servo high-end baby diaper adult diaper packing machine
|Packaging speed||Stable at 40bags/min,|
|Packaging method||Rolling film tape, making bags on line.|
|Packaging material||PE or complex film, single thickness was 50-100μm|
|Packaging dimension||L≤400mm ,W=200mm-400mm,H=90mm -200mm|
|Installation power||About 19KW|
|Power requirement||Three phase four wires system(A,B,C,PE),380V/50Hz|
|Air requirement||Input pressure: 0.6-0.8MPa, air consumption≦200LPM|
We have Great customized and design ability. Any required custom
made machine can be
designed and manufactured for convenient operation and reasonable
cost, making your
packaging system work smoothly.
1- We provide videos and instruction manual to show the process of
2- We provide training for installation for free in our factory.
3- We can send technician to buyer's factory to install the machine
and provide training service.
After Sales Service:
1- One year quality warranty and free lifetime technique support.
2- Free spare parts would be supplied if machine broken within
3- After the warranty period, the spare parts for replacement are
offered based on certain charge.
Changing the format by changing the size compnent,it only takes 20
minutes,it improved the production efficiency.
The full servo driving
By adapting Mitsubishi and Yaskawa motion controlling PLC and
general linear servo driving system,it ensured a highly accurate
package and stability.
Intelligent failure analysis
When the machine breaks and materail abnormal operation happens,it
gave out relatively failure warning tips.
The front compression device Controlling by the separate servo.The
pads that out from the host machine to do the first compression, to
improve the stability of pads-transferring.
The full servo baby diaper packaging machine, the unit type is
GM089NY.Adopting the method of slide-pushing and the row chain
Easy to change the size, and only need to change a small part of
the parts and a simple adjustment parameters, within 45 minutes to
complete the change.
Waste will be generated after seal cutting, and then through the
suction pump to the waste containers.
The protective device is made of aluminum alloy bracket and a
transparent organic glass plate, the thickness of the glass plate
should be over 6mm.
Stacking smaller pile and more bag station to avoid the problems of
glue bag, electrostatic
The bags-transferring device is driven by the separate servo, to
ensure the accurate for transfer place.
The suction bag device driven by the high-pressure pump to produce
the high pressure, to ensure the suction bag stable and reliable.
The Base with the tube that wall thickness is 6mm, braced frame
with solid rectangular steel that thickness is 50mm, the main panel
using steel plate that thickness is 15mm.
The equipment manual specified safety precautions, in the dangerous
device, the equipment of power transmission and air movement
mechanism are labeled with obvious warning signs.
All of the machine parts should do the surface treatment, and
transmission parts made of the special steel and quenching and
The electrical system device in accordance with the relevant
provisions of GB/T5226.1-2002.
Electric control cabinet door adopts rotary open, the wiring is
neat and easy to maintain, the electric control cabinet equipped
with an axial flow fan cooling system.
The configuration of pneumatic system is in line with the national
Chemical nickel-plating was performed on all parts of the surface,
contact with the products stainless steel materials using SUS304,
and harmless to human body.